Bigmonat Wireless Picture Light For Paintings, Dimmable Dartboard Light With Remote And Timer, Rechargeable Battery Operated Dis

Specification * Material: ABS plastic and Aluminum * Power Source: 1PCS 4400mAh lithium batteries(included) * 12pcs super bright SMD LEDs. 2W, 180 Lumens with 3 lighting modes 3000K warm white, 5000K natural white and 8000K cool white, 30,000 hours lifespan of the light. * Each light tube can be turned 180 up and down, rotate each light head independently to desired any angle. Installation Steps: 1.First remove printed paper mounting template from back of unit. 2. Drill two pilot holes in the location where you want to mount the picture light. Place screws (included) in pre-drilled holes. Tighten slightly until secure, but do not tighten all the way. Slide EZ Mount Bracket keyhole slots over screw heads and into position. 3. Use the built-in bubble level to make sure the mounting bracket is level before securing it to the wall. 4. Once you confirm that the bracket is level, tighten the screws to secure it to the wall. Take care not to over tighten. 5. To hang the picture light on the mounting bracket, align the picture light with the mounting bracket and slide the unit down. Picture light will lock into position. 6. To remove the picture light from the mounting bracket: A) Hold the picture light by the base (not light head). B) Slide the unit up. C) Once the body releases from mounting bracket, pull the unit out. PACKING LIST - 1 x Picture Light - 1 x Remote Control - 2 x Screws -1xUSB charging cable - 1 x User Manual