• Important: Read all instructions before installing fixtures. Retain for future reference.
• Safety: For your safety, this fixture must be wired in accordance to local electrical codes and ordinances. All work should be done by a qualified electrician.
• Warning: Make certain power is OFF from the electrical panel before starting installation or attempting any maintenance. Indoor installation only.
• Tools required: 1.Saw2.Measuring Tape3.Electrical Wiring (use type and gauge suitable for application to connect the fixtures)

Pre-installation

• Turn power OFF from the electrical panel before starting installation.
• Locate a suitable position to plate the fixture and open in accordance to the cut-hole dimensions (refer to Hole Cut Table for appropriate size).
• Run electrical wire from the switch (power supply) through the mounting hole-use NMD90 Romex or BX cable.

Fixture installation

• Connect the fixture to the hardwire box by inserting and twisting the male/female connectors.
• Push spring loaded clips on the fixture upwards and insert fixture base in to mounting hole. Release the clips and fixture will be pulled flush to the ceiling.
• Once assembly is complete, turn on power to confirm fixture is working properly. Hole Cut Size4-1/4. Please follow the cut out template with the product.