More Details *180 Lumens, 12 Super Bright Smd Leds, 30,000 Hours Lifespan. 3 Lighting Modes: Warm White & White (5000K), Warm White (3000K) & White (8000K). *Material: Plastic Shape+Metal Neck. *The Picture Light Is Powered By 3.7V 4400Mah High Capacity Li-Ion Battery (Included), 5-6 Hours Full Charging Time.

The Led Indicator Will Auto Off Once The Batteries Are Fully Charged. *The Remote Control Will Operate Lights Within 20 Feet. Up To 10 Lights Can Be Controlled By One Remote Control. *2 Control Ways: Remote Control And Manual Operation Using On/Off Switch. You Can Also Change The Brightness Level Of Each Color By Using On/Off Switch.

Installation 1. First Remove Printed Paper Mounting Template From Back Of Unit. 2. Drill Two (2) Pilot Holes In The Location Where You Want To Mount The Picture Light.

Place Screws (Included) In Pre-Drilled Holes. Tighten Slightly Until Secure, But Do Not Tighten All The Way. Slide Ez Mount Bracket Keyhole Slots Over Screw Heads And Into Position. 3.

Use The Built-In Bubble Level To Make Sure The Mounting Bracket Is Level Before Securing It To The Wall. 4. Once You Confirm That The Bracket Is Level, Tighten The Screws To Secure It To The Wall. Take Care To Not Over Tighten.

5. To Hang The Picture Light On The Mounting Bracket, Align The Picture Light With The Mounting Bracket And Slide The Unit Down. Light Will Lock Into Position. 6.

To Remove The Picture Light From The Mounting Bracket; A) Hold The Picture Light By The Base (Not Light Head). B) Slide The Unit Up. C) Once The Body Releases From Mounting Bracket, Pull The Unit Towards You. *Do Not Put Screws Through Picture. Check To Make Sure The Screw Mount Is Secure.

Packing List - 1 X Rechargeable Picture Light - 1 X Remote Control (Included Cr2025 Battery) - 1 X Micro-Usb Charging Cable - 2 X Screws - 1 X User Manual