SuperLightingLED 3000K Large LED Sheets for Backlighting Countertop 78.7in x 9.45in Flexible 24V LED Light Sheet Cuttable Dimmable Warm White Paper-thin IP20 with Accessory Pack (3000K 6.56Ft IP20)

SuperLightingLED large rollable LED sheet works at 24V and can emit 3000K warm white light. It is paper-thin soft foldable and cuttable perfect for backlighting translucent countertops and walls. Specifications: Light Color: 3000K Warm White Sheet Size: 2m(L)X240mm(W)X8mm(H) / 78.7 (L)X9.45 (W)X0.3 (H) LED Chip: SMD 2835 LED Quantity: 1056 LED Chips Input Voltage: DC24V Working Power: 96W per Sheet Current: 4A Cut Unit: 1 LED (0.85x 0.86) CRI: 95+ Lumen: 9600LM Waterproof Rating: IP20 Lifespan: 50 000+hours Warranty:2 Years Listing: 1 pc 3000K warm white LED light sheet (L78.7 x W9.45 x H0.3 inches) 2 pcs 150 mm long connecting power wires 32 pcs screws 32 pcs screw shims 32 pcs 8mm high anti-collision silicone bumpers Please note that power transformer and controller are not included. Usage and Instructions: 1.Measure the size of the board you want to paste LED backlight sheet on and determine the size and quantity of LED sheets you need to purchase accordingly. 2.Connect LED sheet lights together by wire or connector 3.Choose right power supply and controller for LED panel sheet. Principle: The voltage of the power supply should be the same as the voltage of LED sheet. And the driver wattage should be 1.2 times the the total wattage of LED sheets. For example when you need to power 4 pieces of 24V 28W LED lighting sheets the voltage of power supply should the same also 24V. And the total wattage of 4 pieces 28W LED sheets is 4pcs x 28W=112W. So the wattage of power supply will be 112W x 1.2=135W. (Or a little bit above) Recommend WB5 model to adjust brightness. 4.Connect power supply and controller to LED light sheet panel turn them on and ready for use. Note: 1.Please operate the connection while the power is off. 2.Please make sure that the working environment is clean and dry. 3.Please kindly prepare a 24V power transformer in advance as it is not included. 4.If you need to adjust brightness of this sheet LED a dimmer is necessary.