Under Counter Lights for Kitchen LED motion sensor cabinet lights Three Modes Adjustable:

• On/AUTO/off on: Continuously Lighting Mode (Light ON both daytime and night.)
• AUTO: Motion Sensor Mode (Detected in low-light conditions, can be used when dusk or night.)
• Off: No Light Daylight: Light OFF Motion Sensored In Dark: Light ON [P.S.: motion sensored range 120° and detection distance of 0-3 meters] No Movement After 15 Seconds: Light OFF USB Rechargeable Under Cabinet Lighting With built-in 1100mAh rechargeable battery, the light can be easily charged via the USB-C cable (included). The indicator light on red when it charging, and blue after fully charged. Easy to Install.
• Wipe the surface clean & dry without ash, paint or stains.
• Snap the two plastic clips onto the light
• Tear off the 3M adhesive tape on the plastic buckle.
• Then glue the buckle to the corresponding place. Pay Attention 1. Please don't install the two cabinet lights motion sensors less than 20cm apart, or they will interfere with each other when on "AUTO" mode. 2. When on "AUTO" mode, the led motion sensor lights can only be activated under low-light conditions, so it won't turn on if the light sensor has been detected by the enough lighting. 3. Do not install in humid environment or the outlet of too cold or hot situation, or the sensitivity will be affected. 4. The 3M sticker is disposable, not advised to be peeled of to reuse.
• The 3M sticker cannot be stuck on rough walls, such as brick walls, lime walls, patterned wallpaper etc. Recommended to use on smooth surfaces such as tiles, wood panels etc.
• If the under cabinet led strip lights gets dim and keeps flashing, please charge it in time. If not in use for long time, please store the battery fully charged.